Doing a good job in daily maintenance of the LED display plays a vital role in extending the service life of the display and ensuring the normal operation of the LED display.

1. On average, maintenance is required at least twice a year;

2. Check during the rainy season to determine whether there is water leakage;

3. Regularly inspect lightning rods and grounding lines;

4. On the premise of ensuring visual effects, avoid making the monitor too bright;

5. Avoid not using the monitor for a long time. Leaving it for too long will affect the life of the monitor;

6. Choose to turn off the power when not in use instead of powering the monitor on standby.

7. First turn on the control computer so that it can operate normally, and then turn on the outdoor LED display;

8. Regularly check the power lines and signal lines to prevent the lines from being broken or bitten;

9. The entire power supply system should be inspected twice a year;

10. If any breakage or other damage is found, replace it in time, especially screws, pins, load-bearing beams, etc.;

11. Regularly maintain the surface coatings of products and steel structure welding points to prevent corrosion, rust and peeling;

The life of the LED display is determined by many factors. However, the end of life caused by many factors can be continuously extended by the replacement of parts (such as switching power supplies). LEDs cannot be replaced in large quantities. Therefore, once the LED life ends, it means the end of the life of the full-color LED display.

Based on the above, the service life of the LED display screen is relatively long. With good care and maintenance, the service life of the LED display screen can be extended.