Most of today's buildings are dominated by glass curtain walls, which look simple, high-end, modern and comfortable to look at. If a conventional LED display is installed outside the wall, it will cast a "scar" on the originally modern building and make it look unsightly. So there is a curtain wall LED transparent screen. The curtain wall LED transparent screen can not only ensure normal ventilation and light inside the building. In addition, it can be perfectly integrated with the building. The installation of the LED transparent screen did not destroy the original structure of the building, but showed a strong sense of technology.

The emergence of curtain wall LED transparent screens ensures the lighting requirements and viewing angle range of lighting structures such as floors, glass facades, windows, etc., and ensures the original lighting and perspective function of glass curtain walls. So how is it installed on the curtain wall? Let’s take a look at some of the most commonly used installation methods for curtain wall LED transparent screens:

1: Fully hidden frame installation

The LED transparent screen is fixed on the aluminum alloy frame. The upper and lower parts correspond to the upper and lower beams of the aluminum alloy frame. The two sides of the glass correspond to the two vertical bars on the left and right of the aluminum alloy frame.

2: Semi-hidden frame installation

Since vertically exposed and horizontally hidden glass curtain walls and vertically hidden and horizontally exposed glass curtain walls are both called semi-hidden frame glass curtain walls, there are two installation methods for this semi-hidden frame curtain wall glass.

1. Vertical light and horizontal concealment

Install the glass into the groove and fix it, and then use glass glue to reinforce the left and right sides;

2. Concealed vertically and brightly horizontally

For curtain wall glass, the glass should be placed in the aluminum alloy inlaid groove of the horizontal bar, then a pressure plate should be added to the outside of the glass, and the aluminum alloy vertical bar should be hidden behind the glass.

Three: Exposed frame installation

Whether the open frame curtain wall glass type structure uses special aluminum alloy profiles to make the frame and glass frame or uses steel as the frame, the aluminum alloy frame in the entire curtain wall will be exposed.

Four: rack-mounted installation

This is an installation method in which a column is welded to a stainless steel pendant. The four claws of the pendant are connected to the glass holes in the curtain wall. One hole corresponds to one claw. It can also be said that you first drill a hole in each of the four corners of the glass, and then fix the glass on the four claws of the stainless steel pendant.

Five: Skeleton-free installation

The glass on the frameless curtain wall can also be called structural glass. This kind of curtain wall is mostly used on the first floor of the building. It is similar to the floor-to-ceiling windows of the building. The glass is installed in the form of hoisting, using evenly spaced hooks or special profiles. A method of hanging glass from above. The operation steps are to first use special profile hooks to fix them on the main frame of the channel steel, and then hang the channel steel at the bottom of the plate or under the beam. To enhance the rigidity of the glass, support frames or horizontal support frames can be added above and below the glass. files.