It is first necessary to consider purchasing a better quality cleaning kit. The general cost of cleaning solutions includes electrolyte, high-purity distilled water, antistatic solution, etc. It can effectively clean dust and other traces of dirt on LED transparent screens.

Secondly, some friends think that clean water can also be used, and it will not affect the outdoor LED transparent screen. However, the cleaning effect of clean water is relatively poor, and dust will adhere again after cleaning. At the same time, it should be noted that water cannot be sprayed on the screen. Instead, spray a little cleaning solution on the cleaning cloth and wipe gently in the same direction. You need to unplug the power cord before cleaning.

The cleaning and maintenance of outdoor transparent LED displays are divided into three steps:

Step one: vacuum. Vacuum and clean dirt and dust from the surface of the screen. Absorb dirt and dust from the surface of the LED transparent screen.

Step 2: Wet cleaning. Use water spray and steam humidification to spray the display cover, and use the soft brush on the vacuum cleaner to scrub the lamp cover to remove dirt; note that you cannot spray the cleaning liquid directly onto the screen, but spray a little cleaning liquid on the cleaning cloth, and then gently spray it in the same direction. wipe. You can also scrub the lamp housing with a soft brush on a vacuum cleaner to remove dirt.

Step 3: Dry. Use a vacuum cleaner to absorb water droplets and traces left behind after wet cleaning to ensure that the display mask is clean and dust-free.

Note: Two points should be noted when preparing for cleaning:

1. You need to unplug the power cord before cleaning.

2. Choose a cleaning fluid, usually a cleaning fluid, including electrolyte, high-purity distilled water, antistatic fluid, etc. The selection should be of good quality in order to effectively clean dust and other dirt marks on the LED transparent screen.