LED display screens are increasingly used in the communication media industry. Although LED display screens can bring a certain improvement to the city's image, advertising forms are also flexible and diverse. However, users should pay attention to some matters during the installation of LED display screens to ensure the normal operation of the equipment. Therefore, the editor has listed some main precautions for the installation of LED displays to facilitate DIY installation or supervision of the installation site. staff member.

Things to note when installing a transparent LED display

1. LED transparent screens have a great advantage in weight compared to outdoor full-color screens. The weight of a single square meter is about 12KG. However, if the area is relatively large, the weight of the entire screen is still very large. The load-bearing capacity of the installation location must be the structure. sturdy.

2. Determine the installation location of the LED display. At the LED display installation site, it is determined to install the LED display on a certain wall, under a beam, or between the bodies. This is reflected in the drawing by confirming the column and beam numbers on the left and right sides of the screen on the plan view, and confirming the bottom of the screen on the elevation. elevation.

3. The connection between the installation surface of the transparent LED electronic screen and the mounting bracket, and the mounting bracket and the equipment should be firm, stable and reliable to ensure that the installed equipment does not slip, tilt or fall.

4. The power socket is required to use high-quality products. When the user installs the socket, it should be a dedicated and fixed socket with a ground wire and should be close to the power plug that comes with the device. The socket structure should match the power plug of the equipment to be installed and comply with the requirements of GB1002.

5. Determine the stress points of the screen installation on site. Through on-site observation, questioning relevant user personnel, and consulting relevant construction and civil engineering drawings, the load-bearing stress points (surfaces) of the screen are determined.

6. Anti-rust measures must be taken. Metal components must be firmly welded or connected and must undergo anti-rust treatment. The materials used must have sufficient corrosion resistance.

7. Waterproof measures for the LED display itself. If the LED display is installed outdoors, it must withstand the sun, rain, wind and dust, and the working environment is harsh. If electronic equipment is wet or severely dampened, it may cause short circuit failure or even fire, causing losses. Therefore, during installation, the screen body of the LED display screen and the joint between the screen body and the building must be strictly waterproof and leak-proof. The screen body must have good drainage measures so that it can be drained smoothly once water accumulates.

8. Lightning protection devices need to be installed on display screens and buildings. The main body and shell of the display screen should be well grounded, and the grounding resistance should generally be ≤4Ω, so that large currents caused by lightning can be discharged in time.

9. The LED display itself generates a certain amount of heat when working. If the ambient temperature is too high and the heat dissipation is poor, the integrated circuit may not work properly or even be burned, causing the LED display to fail to work properly. To this end, the LED display screen should be equipped with ventilation and cooling equipment to maintain the internal temperature of the screen at -10~40C.

The installation of the LED display is related to the quality of use, visual effects, post-maintenance and safety of the LED display. Do not be careless during the installation process to avoid unnecessary losses.