The installation of LED transparent screens needs to be adapted to local conditions based on the on-site environment and installed without affecting the on-site environment, so that better display effects can be achieved. During the installation of LED transparent screens, it is easy for people to overlook some details, resulting in some installation hazards during use, which may affect the service life of LED transparent screens, and may even cause safety accidents in serious cases. Then we must pay attention to the following important matters during the installation of LED transparent screens to avoid unpleasant things happening.

1. Load-bearing requirements

LED transparent screens have a great advantage in weight compared to outdoor full-color screens. The weight of a single square meter is about 12KG. However, if the area is relatively large, the weight of the entire screen is still very large. The load-bearing structure at the installation location must be solid. .

2. Firmness and stability requirements

The connection between the installation surface of the transparent LED electronic screen and the mounting bracket, as well as the mounting bracket and the equipment, should be strong, stable and reliable to ensure that the installed equipment does not slip, tilt or fall.

3. Anti-rust measures

Metal components must be firmly welded or connected and must be rust-proofed, and the materials used must have sufficient rust resistance.

4. Life span of structural equipment

The service life of structural equipment should not be less than the safe use period of the transparent LED display, and inspection and necessary maintenance must be carried out according to the usage after installation.

5. Power requirements

The power supply equipment should have a qualified power supply with the same identification as the equipment to be installed. The power supply capacity should be sufficient, the grounding should be reliable, and it should be easy to install.

6. The power supply line of the equipment

Its capacity should be greater than 1.5 times the maximum current value of the device. Although the transparent LED screen is an energy-saving product, it saves more than 30% energy than the traditional outdoor LED display during normal playback. However, the peak power when the screen reaches white balance is still very high. big.

7. Power socket requirements

When the user's power socket is installed, it should be a dedicated and fixed socket with a ground wire and should be close to the power plug that comes with the equipment. The socket structure should match the power plug of the equipment to be installed and comply with the requirements of GB1002.

8. Seismic reinforcement

In areas where earthquake resistance is required, equipment installation shall be reinforced against earthquakes in accordance with the design requirements of the construction drawings.

9. Lightning protection device

Lightning protection: Install lightning protection devices on equipment and buildings. The terminal body and shell should be well grounded, and the ground resistance should be less than 3 ohms, so that large currents caused by lightning can be discharged in a timely manner.

10. Ventilation and heat dissipation

Ventilation and heat dissipation Install ventilation equipment to cool down the screen so that the internal temperature of the screen is between -10°C and 40°C. Try to leave vents behind the screen so that part of the heat generated by the transparent screen can be quickly dissipated.

11. Wire requirements

When the user's power socket is installed, it should be a dedicated and fixed socket with a ground wire and should be close to the power plug that comes with the equipment. The socket structure should match the power plug of the equipment to be installed and comply with the requirements of GB1002.

12. Waterproof and moisture-proof

Those installed indoors need to pay attention to moisture-proofing, and those installed outdoors need to pay attention to the details of waterproof and lightning protection measures; whether the location is close to the sea or a chemical plant, and what the degree of salt, alkali, and acidity in the air is. The connection between the equipment and the building must be strictly waterproof and leak-proof; the equipment has good drainage measures so that it can be drained smoothly once water accumulates.

13. Power supply requirements

The capacity of the computer room or AC transformer, whether the cables need to be rearranged, or whether the diameter of the already arranged cables meets the requirements; if it is single-phase power, whether there is a grounding wire; if it is three-phase power, whether it is three-phase five-wire . If rewiring is required, the length of the power cord at the site needs to be accurately measured.

14. Installation matters

The condition of the wall where the display is installed, the installation method (mounted, floor-standing, suspended, wall-mounted, supported, pillar) and the stress conditions. And according to the specific size of the display screen, confirm whether there are obstacles at the installation site that hinder the installation of the display screen. In the case of inlaid installation, whether the reserved installation slot is appropriate; if there are decorative partitions on the wall, the condition of the wall must be known.

15. Check the welding parts

The welding of the welding parts must be firm, without any welding, missing welding, etc. The welding parts must be flat, the welding parts must be scraped, and the processing technology must be strict. The welded parts should be polished as much as possible, sealed and waterproof, and smooth and flat without sharp corners.

The above are the main parts of the safety requirements when installing LED transparent screens. During installation, details must be done well. Details determine the success or failure of the matter, and details also determine the quality of the screen.