1 The design principles are the same:

Like the transparent LED display, the LED grille screen adopts a hollow design based on the traditional LED display, removing the redundant parts and providing product transparency, making the location where these two displays are installed more transparent. higher.

2 The installation locations overlap:

Both are installed with glass curtain walls. The main purpose is to take advantage of their high transmittance characteristics without affecting indoor lighting. This is mainly because the opacity of traditional outdoor LED displays suppresses indoor light. It is not conducive to the health of indoor workers. As early as 2015, some European countries have issued relevant policies that do not allow the installation of outdoor LED displays without transparency.

2: The difference between the two

1. The use of lamp beads is different: LED light strip screens generally have a relatively large production area, so the point spacing is relatively large, and the point density is relatively small. However, when used in outdoor environments, high-brightness products are required, so in-line lamp beads are generally used. To ensure the high-brightness characteristics of the screen. The LED transparent screen is installed indoors for outdoor viewing. The point density is generally relatively large, the point spacing is relatively small, and the precision is higher, so it is generally made of SMD lamp beads.

2. The installation environment is different: LED light strip screens are installed outside the screen body, while transparent LED displays are installed in indoor environments.

3 Different waterproof levels: Because the LED light strip screen is to be installed in a pure outdoor environment, it continues the high-proof level characteristics of the outdoor LED display. The general protection level needs to reach IP65; while the LED transparent screen is installed in an indoor environment, but The requirements for protection level are not high, usually IP34. Unless the glass plank is used, nano-protection must be carried out to improve the protection level.

4 Different weights: Because the LED light bar screen needs to provide a level of protection, it must adopt a glue-filled and waterproof process, which will increase the weight of the light bar itself. Because the light bar itself is heavy, it must be made of cold-rolled steel plate or die-cast aluminum. Making the box will make the entire screen heavier. Generally, the weight per square meter is about 20KG. However, this process does not exist for LED transparent screens. The light bars will be thinner. Some Shenzhen adopts a borderless design. The screen body is lighter, and the weight can be as light as 12KG/square meter, or even lighter.

The transparent LED display can be the perfect combination of modern art and metal modeling. It has the characteristics of high permeability, high stability, long service life, etc. The pass rate reaches more than 80%, so that after the installation is completed, it will not only affect the original architectural style And indoor lighting viewing line of sight, the leaping design of the grille screen breaks through the many limitations of traditional LED display screens on building walls, enhances its commercial value, and exerts a good advertising effect.