source:Industry News release time:2023.11.07 Hits:1 Popular:led screen wholesaler
In the quality inspection and control of LED transparent display products, aging inspection is a very important and essential link. It is also the last inspection link in the production inspection of LED transparent displays and an important guarantee for the quality of LED transparent displays. LED products can improve their performance after aging and contribute to stable performance in later use. LED aging inspection is a measure adopted based on the characteristics of the product's failure rate curve, that is, the bathtub curve, in order to improve the reliability of the product. Its main process only includes the following three points:
One: Check
1. Check that all the above box modules are installed correctly;
2. Check whether there are short circuits or mixed connections in the electrical system;
3. Check whether the module installation is smooth and whether the seams are neat;
4. Check whether the appearance is intact and whether there are any bumps or scratches;
Two: Light up aging
1. Use online control system to light;
2. The test time lasts for more than 72 hours;
3. The aging of LED transparent display is divided into white light aging and video aging;
4. Aging methods include constant current aging and constant voltage aging;
Three: Indicator inspection
After the aging test is correct, ask the quality inspection team to conduct parameter index testing.
1. Check content: white screen, red, green, blue monochrome, sudden grayscale changes, video effects, text effects;
2. The white screen inspection time of the LED transparent display screen shall not be less than 24 hours;
3. Monochrome and grayscale sudden change inspection shall take no less than 24 hours;
4. Video and text effects will be checked for no less than 24 hours;
5. The aging inspection of the LED transparent display screen must be attended by someone, and if any questions are found, they should be reported to the engineering department manager for resolution in a timely manner;
In addition, over-current impact aging is also a newer aging method adopted by manufacturers. This type of aging is performed by using a constant current source with adjustable frequency and adjustable current to judge the quality and life expectancy of LEDs in a short time. At the same time, It can also pick out many hidden danger LEDs that cannot be picked out by conventional aging, so it is also used more often. By doing the above work well, we can to a certain extent prevent LED screen failures at the end of use due to insufficient aging measures, ensure the long-term and stable operation of the screen, and create greater value.