source:Industry News release time:2023.10.23 Hits:1 Popular:led screen wholesaler
1. Maintenance must be performed by professionals
In recent years, the technology of LED transparent display screens has become more and more mature, with higher precision and more reasonable structure, and can completely realize seamless splicing. The LED transparent display screen not only upgrades the power box and screen body, but also comprehensively optimizes and innovates the structure and performance. It has high-precision splicing and is very convenient to install and maintain. In order to avoid electric shock or damage to the circuit, professional technicians should be required to repair the screen.
2. Do not touch water when handling dust
Whether it is an indoor or outdoor LED transparent display, there will be more dust on the surface when it is exposed for a long time, especially the outdoor advertising screen. When there is dust, the surface of the screen cannot be wiped directly with a wet cloth. You can wipe it with the help of alcohol. After wiping the dust During the cleaning process, the LED screen should always be kept closed; when the wiping is completed, do not rush to open the screen first. The alcohol on the screen should be completely evaporated before the LED transparent display can be opened.
3. Do not operate the switch frequently
LED transparent displays are different from ordinary home appliances. During use, remember not to turn off and on the display power frequently to avoid excessive current affecting the service life of the display. It will also cause a short circuit and affect the company's publicity effect.
Switching sequence of LED transparent display
1. Pay attention to the switch sequence when turning on the screen: turn on the phone first, then turn on the screen after the screen is fully lit and preheated. When turning off the screen, the sequence is reversed: turn off the screen first, then turn off the phone. If you turn off the computer first, the screen will be highlighted and the lamp will burn out easily, affecting the service life of the screen and causing serious consequences.
2. The time for turning on and off each time should be more than 5 minutes. If the machine is turned on and off frequently, it will cause a short service life of the display and short circuit of the display.
3. Only after the computer enters the engineering control software can the screen power be turned on.
4. Avoid turning on the screen when the screen is all white, because the inrush current of the system is the largest at this time.
5. When the ambient temperature is too high or the heat dissipation conditions are not good, LED lighting should be careful not to turn on the screen for a long time.
6. If there is a very bright line on a certain part of the electronic display screen, the screen should be turned off in time. In this state, it is recommended not to turn on the screen for a long time.
7. The power switch of the display screen often trips. At this time, you should check the screen or replace the power switch in time.
8. Regularly check the firmness of the hook. If there is any looseness, please make timely adjustments and re-reinforce or update the suspension components.
If you have any questions or unknowns when installing and using our company's products, please call or write to us in time. We will wholeheartedly provide you with convenient, fast and thoughtful service!